BDS Suspension adds to its lineup suspension lift kits and accessories for the redesigned 2019 RAM 1500 4WD trucks with new 6” Performance Coilover Systems. Specially designed for next level performance and capability, these new systems feature BDS’s tried and true high clearance suspension design along with FOX 2.5 remote reservoir coilovers. These can be purchased as a complete lift system or as a coilover upgrade for customers already equipped with the BDS 6” kit. As with all BDS lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes BDS’s exclusive No Fine Print Warranty, ESC system compatibility and a 5-year 100,000-mile drivetrain warranty. Upgrade your new RAM 1500 with BDS and FOX.
- Designed to correct suspension, steering and driveline geometry
- FOX 2.5 RR coilovers and 2.0 IFP shocks for next level performance
- High clearance laser cut crossmembers maximize ground clearance
- Ductile iron steering knuckles for strength and ESC system compatibility
- Multipoint differential relocation brackets to correct CV angles
- Allows fitment of up to 37" tires
Take your new 2019 RAM 1500 to the next level with the new 6” performance coilover systems from BDS Suspension. Based around the tried and true high clearance technology that has made BDS the go to for RAM suspension lifts, these systems have been designed from the ground up to get more out of your new RAM. This new 6” coilover system offers smooth on-road comfort while providing impressive off-road performance and capability with clearance for 35-37” tires.
Performance comes from a pair of precision tuned FOX 2.5 factory race series remote reservoir coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore zinc-plated and double clear coated steel body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs and mounting brackets. Along with these coilovers these new 6” coilover systems utilize a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS’s multipoint relocation bracket system to secure the front differential and keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Rounding out the front of this kit are a pair of stainless steel braided extended brake line and sway bar relocation brackets.
In the rear of this 6” lift system the factory coil springs are replaced with 5” ProRide coil springs to level the stance. With the additional ride height the rear suspension geometry is corrected with control arm relocation brackets, a bolt-on rear track bar relocation bracket to recenter the axle, extended length sway bar links to correct operating angle, and bump stop extensions to properly limit up travel. For the rear of these systems a pair of FOX 2.0 IFP performance series gas shocks are utilized to offer improved damper performance in rough terrain and a smooth ride on the highway. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS’s No Fine Print Warranty, ESC System compatibility and a 5year-100mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 RAM 1500 truck with this new 6” performance coilover system from BDS Suspension.
2019 RAM 1500 4WD*
2019 RAM 1500 Rebel 4WD*
37x12.50 Tires on 17x9 Wheels (4.5” BS)
37x12.50 Tires on 18x9/20x9 Wheels (4.5-5” BS)
*other sizes can be used, trimming may be necessary
1. This system will not fit vehicles equipped with 22” wheels from the factory due to a difference in hub bore size.
2. Stock 17-18" wheels can not be re-installed. Stock 20" can be reinstalled with factory tire.
3. Will not fit adjustable air suspension equipped models.
#1637F - 6” C/O System - $4114.19 jobber
#88402231 - FOX 2.5 RR Coilover Upgrade (6”) - $1959.95 jobber
#122251 - Performance UCA Kit
|Box Kit #||Qty||Description|
|BDS022632||1||2019 Ram 1500 Box Kit 1|
|BDS022633||1||2019 Ram 1500 Box Kit 2|
|BDS022634||1||2019 Ram 1500 Box Kit 3|
|BDS022635||1||2019 Ram 1500 Box Kit 4|
|FOX88402231||1||FOX 2.5 RR Coilovers (6” Lift)|
|BDS022508||1||2019 Ram 1500 Rear Box Kit|
|BDS032508||1||2019 Ram 1500 5" Rear Coil Box Kit|
|FOX98224751||2||FOX 2.0 Performance IFP Shock|
Posted on 08-30-2019